Easy to install and easy to use

These universal aerator flow controllers fit onto the tap nozzle

Swap your old foamers for these aerators and reduce your water consumption to 5 liters per minute, regardless of the incoming water pressure. The aerator will provide a powerful, foamy water jet, which will seem quite familiar.

These indispensable flow controllers do not accumulate tartar deposit, are entirely hygienic and easy to maintain.

The expected water savings can be as much as 65% compared to a tap not fitted with this flow controller.

A simple and efficient way of reducing your water bill!

Characteristics

Air-water mixture produced in swirl chamber

Aeration produced by Venturi effect

Descaling system

Flow rate: 5 l/min*

Operating pressure: 2 to 5 bar

*Saving obtained by fitting a tap with a flow rate of 15 l/min with a flow controller which limits the flow rate to 5 l/min.

The taps currently installed on washbasins, kitchen sinks and showers, which comply with NF standards, have a minimum exit flow rate of 12 to 16 l/min (without the aerator).

For bathtubs, the minimum flow rate is 20 to 25 l/min.

Evidently, our water-saving devices will have an immediate impact on your water consumption.

The flow controllers stabilize the water flow (measured in l/min) resulting from given water pressure (measured in bar). Water savings are thus real and significant, without any disadvantage for users.

Our economizers are available in two versions: male or female nozzles, depending on the tap model