Our device does a barrage in the water tank and restrains the overflow water which is usually wasted

It's also important to know that the force of the flush is not coming from the volume of water but from the height of the water in the tank.

Our device fulfills the manufacturers intended height of water in the tank to provide the right water flood

The setting is easy. You just withdraw the tank cover, you close the toilet water faucet, you activate the flush to remove the water from the tank, you install on both sides of the evacuation valve the 2 plaques, you close the cover and open the faucet.

That's it to save water

The device is soft and suitable for any toilet tank. It keeps the water height and the force of the water flood but with a smaller quantity of water.

Not necessary to boil it before to use it. The device is cold water resistant for years

Water-saving plates for toilet tanks

Saving water the simple way

Flush your toilet and save 4 liters of potable water.

Install these flexible plates made of recycled materials in your toilet tank

to form a double barrier, which will prevent the toilet from using too much water every time you flush.

This ingenious system creates enough pressure for proper evacuation, while saving up to 4 liters of potable water.

Save up to 40% of water

with no loss of water pressure

Easily installed in any standard toilet tank.

Characteristics

Recycled plastic honeycomb structure

Flexible metal frame

Rot-proof

Suction effect for optimum adhesion

* Water saving recorded when positioning 2  plates in a 10-liter toilet tank with the appropriate spacing to block 4 liters of water.

Water saving bags for toilet tanks

Turn your toilets into an economic system

Save more than 2 liters of potable water every time you flush the toilet.

This bag turns your standard toilet into a water-saving system without any mechanical intervention. Fill the EcoSac bag with water and hang it inside your toilet tank. You will reduce the quantity of water used every time you flush.

A simple way to save 30% of the water used every time you flush

without any loss of pressure or risk of blocking the mechanism.

Easily installed in any standard toilet tank

Characteristics

VERY resistant flexible polyurethane bag

Saves 2.5 liters of water

Easy to install

*An average toilet uses 9 liters of water every time you flush. The average person uses the toilet 4 times per day, resulting in a consumption of 36 liters of water per day and per person.

Thanks to the our toilet tank bag, daily toilet water consumption is reduced by 10 liters, i.e. 27.7%.